Home Home How Much Does Inground Pool Resurfacing Cost – 2020 Guide

How Much Does Inground Pool Resurfacing Cost – 2020 Guide

Source: homeguide.com

It is said that the pool is one of the most frequently used units in every home. We spend so much time choosing the right materials, shape, size, and location of it, and we plan on using it for decades and generations. If you want to be able to do this, without having to constantly deal with damages and breaks, you need to resurface the unit once in a while. In this article, we are going to talk about the costs that come with the resurfacing project, and how much would that cost for an inground unit. Know that the prices will vary depending on a lot of things, including the size of the unit, its condition, and the materials you are going to choose.

How is pool resurfacing done?

Source: poolresurfacingchandler.com

This whole process should be done so that it makes your unit last longer. As you already know, the pools are made to last for decades, but it does not mean that they cannot get damaged with time. It is said that when you do this process, you will be increasing the life of the unit, and you will know that you won’t have to spend a lot of money later on.

Almost all the pools are made with concrete, but on top of this material, there is a layer of another material that is made to protect the concrete and to keep the shape intact. The layer can be done with fiberglass, pebble, or even with tiles. Depending on your personal preferences, you probably chose the layer the first time around, but now may be time to replace it and resurface the unit.

Source: lifeinua.com

When you are doing the resurfacing, you can choose if you want to stick to the same materials, or if you want to go with something new. The tiles are the most common choice for users around the world, but they are also most likely to get damaged with time. If you don’t choose the right type, they may get broken or in some cases, they may come loose. This is a hazard for everyone using the pool, and you can easily trip, slip, fall, or get injured by broken tiles.

The process of resurfacing takes several steps and you can choose to do them on your own, or you can talk to a professional about helping you get the job done. Some believe that you will be cutting on costs if you decide to go with a DIY project, but the reality is, if you don’t get the job done right, you risk having to spend a lot of money on materials, and then spending even more to use a service that will help you out.

The first thing you need to do is to drain the unit. It is said that the best time to do this is in the off-season when you are not using it frequently. It is best done in early spring when there are not too many rains, and when it is already warm enough for everything to get dried fast. Know that you need to pay attention to where you are going to put the water, as there are laws about pool water in some of the countries.

Source: poolresurfacingmiami.net

Next, you will need to clean everything up. This includes both large things, including the leaves and other debris, as well as small dust, dirt, and everything else. Know that pressure washing can help you out with this, and you can also use vacuum cleaners as long as the unit is dry. For the next step, you will need to prepare the unit, and seal any cracks or damages done to the inside of the unit.

Prime the inside of the unit, and choose the right material depending on your preferences. Most users choose epoxy, but you can choose anything that will help you get the job done. Know that you need to use the right protective equipment, so you don’t breathe in all of the fumes. Finish and sand the unit, and here, making sure you apply enough coats of the primer or epoxy. Know that you should wait for each layer to dry completely before applying the next coat. The process should take no more than a day.

The final step is that you should wait for the materials to completely dry before you refill the unit with water. Experts suggest that you should wait at least a day or two before refilling it.

Costs

Source: poolresurfacingscottsdale.com

According to poolresurfacingdallastx.com, the price of this project depends on a lot of things, including the size of your pool, materials that you want to be used, and if you have any additional problems with the unit itself. Know that plaster is the cheapest material used for resurfacing, so if you are looking to do this on a budget, this is probably the way to go.

If you are looking to know more about the exact numbers, know that in most places, the prices vary between 5 and 10 dollars for a square meter, and depending on the service you want to use, the labor should cost about 500 dollars. However, this all depends on the materials, the shape and size of your unit, your location, and the particular service that you choose. Know that the costs will be divided, and the preparing price should be about 300 dollars.

Source: ouviste.com

Depending on the finish you can choose, the whole project may be a bit or less pricy and the great thing is, if you don’t want to spend too much money, you can cut costs on a lot of things. Talk to the service you choose about giving you an estimation depending on your specific situation, and if you want things to get done on a budget, don’t forget to mention that.

These are the most important things you should know about this project, and the final cost should not be more than five thousand dollars. Know that investing this money now will spare you a lot of trouble later, and you will never risk the safety of your family, or get stuck with a broken unit in the summer.

LEAVE A REPLY

Please enter your comment!
Please enter your name here